Rev. 00 02/21
OptiCenter OC09
Operation
63
This coating mode is deactivated by default but can be activated
as needed.
– Set parameter no. 3412 to 1 (See chapter "Parameter
1.
2.
3.
Delay fresh powder demand
In coating mode with powder recovery (spray), fresh powder is also fed
into the OptiHopper after the set time has elapsed in addition to the
recovery powder until the powder level is reached again.
Summary of Contents for OptiCenter OC09
