Rev. 00 02/21
OptiCenter OC09
Product description
21
Suction unit
The suction unit provides the following features:
–
Dust-free removal of coating powder from the OptiHopper
–
Dust-free cleaning of the OptiCenter housing and components with
additional brush head
–
Can be enabled or disabled at any time on the TouchPanel
–
The extracted powder is transported to the after filter (the suction
power is increased by additional AirMover)
fig. 8
Level sensors kit** (OptiHopper)
The kit provides the following features:
–
Two level sensors for monitoring the levels ("full" and "low")
–
The sensors are cleaned with compressed air pulses
fig. 9
Summary of Contents for OptiCenter OC09
