23 Declaration of Incorporation according to 2006/42/EC (Machinery Directive)
Declaration of Incorporation
according to the EC Machinery Directive 2006/42/EC, Annex II, 1.B for partly
completed machinery
We,
GEMÜ Gebr. Müller Apparatebau GmbH & Co. KG
Fritz-Müller-Straße 6-8
74653 Ingelfingen-Criesbach, Germany
declare that the following product
Make:
Butterfly valve, metal, motorized
Serial number:
from 20.03.2019
Project number:
KL-Metall-Motorisch-2019
Commercial name:
GEMÜ R478
meets the following essential requirements of the Machinery Directive 2006/42/EC:
1.1.3, 1.1.5, 1.1.7, 1.2.1, 1.2.2, 1.2.3, 1.2.4, 1.2.5, 1.2.6, 1.3., 1.3.2, 1.3.3, 1.3.4, 1.3.7, 1.3.8, 1.3.9, 1.5.3, 1.5.5, 1.5.6, 1.5.7, 1.5.8,
1.5.9, 1.5.13, 1.5.14, 1.5.16, 1.6.1, 1.6.3, 1.6.5, 1.7.1.2
We also declare that the specific technical documentation has been compiled in accordance with part B of Annex VII.
Citation of the harmonized standards used in compliance with Article 7 Section 2:
EN ISO 12100:2010-11
Safety of machinery – General principles for design – Risk assessment and risk re-
duction (ISO 12100:2010)
EN 593:2017
Industrial valves – Metallic butterfly valves for general purposes
Citation of other technical standards and specifications used:
EN 558:2017-05
Industrial valves – Face-to-face and centre-to-face dimensions of metal valves for use
in flanged pipe systems
The manufacturer or his authorised representative undertake to transmit, in response to a reasoned request by the national au-
thorities, relevant information on the partly completed machinery. This transmission takes place:
Electronically
Authorised documentation officer
GEMÜ Gebr. Müller Apparatebau GmbH & Co. KG
Fritz-Müller-Straße 6-8
74653 Ingelfingen, Germany
This does not affect the industrial property rights!
Important note! The partly completed machinery may be put into service only if it was determined, where appropriate, that the
machinery into which the partly completed machinery is to be installed meets the provisions of this Directive.
2020-11-12
Joachim Brien
Head of Technical Department
GEMÜ R478 Tugela
www.gemu-group.com
105 / 108
23 Declaration of Incorporation according to 2006/42/EC (Machinery Directive)
