Page2
owners manual
Prp700-Prp800
POWER
Main volume set up
Connecting headphones
•
The headphones connection disables the internal speaker system (Prp800 only)
•
Main volume slider adjusts the headphones volume
• The
model
Prp700
need to be connected to an esternal speaker system (or headphones).
Move the volume slider on the control panel to set the instrument volume.
Moving the slider left the volume will be decreased, moving it right it will
be increased. Warning! : Excessive volume (especially with headphones
connected) can be harmful to your hearing.
In addition to the internal amplifi cation system (Prp800 only), it is possible
to connect an headphones to the piano. The headphone inputs is located
in the rear panel of the instrument. Using headphones will allow you to
play the piano, without causing any disturbance.
Starting instrument
Demo listening
The piano features 16 demo songs. This is a great way to become familiar with the variety of sounds
of the instrument in a short and uncomplicated manner. To start a demo song, simply press the
button corresponding to the demo song of your choice. It will begin within two seconds
Connect the instrument power supply to an appropriate AC outlet and
switch it on using the ON/OFF button on the rear panel. It is normal for
the piano to take a few moments to initialize. The default sound on startup
is PIANO1.
Min.
Max.
Whenever the DEMO button is pressed the preset selection button leds will start fl ashing. Selecting
any of the buttons within 2 sec. The demo song assigned to that button will start.
PIANO2 Demo selection
RHOD1 Demo selection
You may stop the Demo at anytime by pressing the demo button again. If no buttons are pressed
while the demo song is playing, the entire demo sequence will be played from n.1 PIANO1 to N.16
GUITAR.