GEM Prp700, Owner'S Manual, Page: 19 / 24

Page15
owners manual
Prp700-Prp800
DATA
BALANCE
DATA
BALANCE
DATA
BALANCE
DATA
BALANCE
DATA
BALANCE
F13- Equalizer
This menu turns ON or OFF the piano internal equalizer.
Press the
functions button
Select F13 using the SELECT/TEMPO
buttons
Pressing the DATA button the display shows
the current value (ON by default).
Set OFF using the DATA
buttons.
F14- Damper physical model
This menu enables or disables the piano internal Damper Physical Modeling.
Press the
functions button
Select F14 using the SELECT/TEMPO
buttons
Pressing the DATA button the display shows
the current value (ON by default).
Set OFF using the DATA
buttons.
F12- EFX
This menu allows you to edit the different effect type parameters.
Press the
function button
Select F12 using the
SELECT/TEMPO buttons
The function
button fl ashes
Press again
The display shows the
current effect selected
for editing (CHORUS by
default)
CHORUS
PHASER
TREMOLO
DELAY
Select effect type using the
SELECT buttons
Function button
fl ashes
Press again
Select the
parameter to edit
using the SELECT
buttons
DEPTH
PARAM1
PARAM2
Edit the
parameter value
using DATA +/-
buttons
VALUE RANGE
F15- Decay Env.
This new function enables you to select two different modes for the damper pedal for the decay of
strings, pads, organs etc. sounds. If using dual sounds (piano+strings) for example, you can select
DECAY ENV. ON (which is the factory default), allowing the non piano sound to decay at a pre de-
termined decay envelope. By turning this feature to OFF, the Strings, (Pads, Organ etc.) will remain
“held” until you release the damper pedal.
Press the
functions button
Select F15 using the SELECT/TEMPO
buttons
Pressing the DATA button the display shows
the current value (ON by default).
Set OFF using the DATA
buttons.
F16- Power LED
Set ON or OFF the power LED located under the piano music rack
Press the
functions button
Select F16 using the SELECT/TEMPO
buttons
Pressing the DATA button you can switch ON
(default) or OFF the power led lighting
Selecting the DEMO
button on the panel the
Power LED will be set ON