Page7
owners manual
Prp700-Prp800
DATA
BALANCE
DATA
BALANCE
TOUCH: Selecting dynamic curves
The TOUCH parameter sets the response between the piano keyboard and the sound generator. In this
way it is possible to adapt the instrument to the piano technique that best suits your playing style.
The piano default set
up recall the NOR-
MAL curve.
Programming a Fix dynamic value
Select fi rst the TOUCH FIX mode
Keep the TOUCH button pressed for more than
2 sec. The three TOUCH leds start fl ashing and
the display shows:
No light on
Now by pressing the BALANCE/DATA buttons
you can set the dynamic value transmitted by the
keyboard.
The fi rst time you press the button, the display
shows the current fi x dynamic value,
Increase
value
Decrease
value
The next time you press the buttons the value is
modifi ed.
NORMAL
Request a medium action to
reach high level dynamics and
brilliance.
HARD
A strong action is requested
to reach high level dynamics
and brilliance.
FIX
The piano keyboard sends a
fi x dynamic value (program-
mable from 0 to 127).
SOFT
A low action is requested to
reach high level dynamics and
brilliance of sound.
TRANSPOSE: to change the instruments tranposition
The global piano transposition can be increased or decreased it by +/-12 .
Keep the TRANSPOSE button on the control panel
pressed for more than 2 sec. , the corresponding
led blinks. The display enters the transpose edit
mode.
Increase
value
Decrease
value
Press the BALANCE/DATA buttons to change the
current value. The fi rst time you press the button
the display will show the current value (default=0,
C=C). The next time you press the buttons the
value will be modifi ed.
ETC.
Press the TRANSPOSE button to exit the
transpose edit status. The button led stops
fl ashing but remains ON, to show the
current transposed status of the piano.
Press the TRANSPOSE button again, to
quit the transpose, restoring the normal
piano status mode.