Page10
owners manual
Prp700-Prp800
DATA
BALANCE
DATA
BALANCE
DATA
BALANCE
Erase the recorded tracks
Erase the entire song
Recording using the metronome guide
The piano sequencer enables you to erase a recorded track. Keep pressed for more than 2 sec. the
track button you wish to delete. The display shows CLR (clear). Press the BALANCE/DATA buttons
to confi rm.
Recording mode: overdub, replace
Keep pressed for more than 2 sec. the REC button to delete the entire song memory. The display
shows RCA (Record Clear All), press the BALANCE/DATA buttons to confi rm the request.
The piano sequencer features two recording modes:
overdub
and
replace
. In overdub mode the
new performance will be added to the existing song. In replace mode, the new song substitutes
the existing one. The two modes can be set separately for each track. (i.e: TRACK1 overdub mode,
TRACK2 replace mode or vice versa).
The fi rst menu parameter will appear, the display
shows:
Now press the SELECT/TEMPO buttons, to select
the recording mode menu.
The display enters the new screen showing:
REPLACE
MODE
OVERDUB
MODE
Now press the SELECT/TEMPO buttons again. The
display shows the current recording mode:
Press BALANCE/DATA buttons to select overdub
or replace mode.
REPLACE
MODE
OVERDUB
MODE
Display confi rm message
Display confi rm message
With the sequencer it is possible to record a song using a proper metronome guide. Set up the
metronome parameter as already explained in the previous chapter, TIME SIGNATURE, ACCENT,
VOLUME, SPEED. When these correspond to your needs, press the REC button on the control panel.
They will be automatically memorized in the sequencer.
NOTE:
Once the TIME SIGNATURE parameter is stored in the sequencer it is not be possible to change the setting.
Keep pressed for more than 2 sec. the track button
where you want to modify the recording mode.