Geko G81058, Instructions For Use Manual

Page: 92 / 96

1
91
EN
No fuel.
Damaged or dirty spark plug.
Improper charge between electrodes.
Water in the fuel tank or fuel mixed with water.
Dirty vent valve.
Dirty air filter.
Plants around the cutting head isn’t possible to cut.
If the blade is used, it may be worn out or blunt. Change for new
one.
Check if all the bolts and nuts are well tightened up.
Check if there is any leakage from the fuel tank.
Engine starts, but it immediately stops
The brush cutter doesn’t cut properly
Transport and waste management
Transport
When you want to transport the brush cutter, empty the fuel tank and
secure the cutting elements.
Waste management
The brush cutter loses its efficiency after certain service life. In such
case, please, contact your nearest service center.
Cleaning
Before starting the engine
www.torriacars.cz | Motor scythe brushcutter GEKO