Geko G81058, Instructions For Use Manual

Page: 88 / 96

1
Brush cutter application chart
Use only accessories recommended by the manufacturer according to
the nature of the surface you are going to cut.
Metal blade usage
1. Check that the blade screw is tight and make sure it is not
damaged.
2. Make sure that the blade and holder are fastened according to the
manual and that the blade rotates freely without excessive noise.
Rotating parts that are not attached correctly can cause serious injury.
Make sure the blade is not bent, cracked or otherwise damaged. If the
knife is not in one hundred percent condition, remove it and replace it
with a new one. When using the strap, place the brush cutter on your
right side. Adjust the length of the strap so that the cutting head is
parallel to the ground.
WARNING: Be sure to use the shoulder strap and the cutting head
guard. If this is not the case, you risk serious injury if you trip or lose
your balance. Use only original cutting blades and heads.
87
EN
www.torriacars.cz | Motor scythe brushcutter GEKO