Dateiname mit Revisionsstand:
erstellt/geändert am:
erstellt von:
geprüft von:
freigegeben von:
Seite
29-5000 Pneumatik holder_EN C
04.06.12/03.12.2018
ssta
cgro
cgro
7 von 28
The Pneumatic Endoscope Holder is operated by use of pneumatic pressure:
either from the central compressed air supply
or from a compressed air cylinder with a pressure regulator
(CO
2
;AIR;NITROGEN)
The required pressure is 5 to 8 bar (optimal performance 7-8 bar).
II-3 Operation
Pressing the control lever at the distal end with on finger releases all the 3 ball joints
simultaneously. Now it is possible to place the endoscope in the desired position
-
only with one hand.
The Pneumatic Endoscope Holder will become tightened as
soon as the control lever is released.
III
– ASSEMBLY AND OPERATION
The assembling, the fixation on the table, the operation with pressure as well
as the functional handling should first be practiced outside of an active
surgery.
Recommendations about the positioning on the OR-table and maintaining the
sterility during the procedure can be found in part (V).
III-1 Mounting the Pneumatic Endoscope Holder on the OR-table:
Angular
adjustment and
tightening lever
