MU-A-RectiRail DL2-rev01a-Gb
33
/ 44
6.6 Scan mode
The scan mode is used to display and move cursors on the graph for accurate
measurement of the coordinates of a specific point.
Access is via the button
.
The graph area consists of:
•
2 cursors
(blue and green)
These cursors can be moved using:
-
The
RectiRail DL2
joystick
-
The green and blue arrows on the
PDA
screen
-
A
pen
, by clicking on and dragging the blue or green lines
•
3 value pairs
The values displayed to the right (in blue) and to the left (in green) correspond to the
intersections between the measurement curve and the cursors:
-
X = sensor position
-
Y = measured value
The third coordinate in the middle (in black) gives the difference between these
intersections.
