4
Gerhard Geiger GmbH & Co. KG | 100W0516
0518
V000
en
EN
EN
f
Do not operate the device if operations such as, for example, window
cleaning are to be carried out in the vicinity.
f
Disconnect the device from the mains power supply if operations such as,
for example, window cleaning are being carried out in the vicinity.
I
ATTENTION: Important safety information. Follow all installation
instructions, as incorrect installation can lead to serious injuries.
f
Connection must be carried out by a skilled electrician according to the
regulations in force locally.
f
The mains plug of the tubular motor must be accessible after installation.
f
On the installation of the tubular motor without mechanical protection of
the driven parts, the tubular motor must be installed at a height of at least
2.5 m above the ground or of another level which provides access to the
drive.
f
Before the tubular motor is installed, all leads which are not needed are to
be removed and all equipment which is not needed for actuation is to be
put out of operation.
f
If the tubular motor is controlled by a switch or pushbutton, the switch
or pushbutton must be mounted within eyeshot of the tubular motor. The
switch or pushbutton must not be located in the vicinity of moving parts.
The height of installa tion must be at least 1.5 m above the floor.
If the apparatus is equipped without a pin and a socket connector (STAS3K)
in the connecting lead, or other means for disconnecting from the mains
with at least a 3 mm contact opening on each pole, a disconnecting device
of this type must be incorporated into the permanently installed electrical
installation according to the wiring rules.
f
Permanently installed control devices must be attached visibly.
f
The correct dimensioning of the drive is to be observed.
4. Intended use
The tubular motors of the model range
MODULARline (GR45..E01) with the Easy
system are designed exclusively for the operation of rolling shutters and screens.
If the tubular motors are used for other applications and/or modifications are
performed to the tubular motors, which have not been discussed with GEIGER
Antriebstechnik, then the manufacturer is not liable for personal injury and/or
damage to property and for consequential damage.