Correct Operation Stages
!
Warning:
For your safety concern, please practice in open tracts for the first time ride. After mastering the tricks, you may ride on
regular roads and follow the traffic rules consciously. Do not lend it to people who do not know how to ride the electric
bicycle, do not disassemble and refit the electric bicycle, please pay attention that brake in advance to allow longer braking
distance in rainy or snowy weather.
Operation Stages:
1.
Start
: insert the bicycle key into the power socket, turn to “On” position in the
clockwise direction, when the battery level indicator in bike meter is on, it
Power Lock
indicates the
power is on.
(Battery of Hanger Type: Click the switch of the battery pack on the “-” direction.)
2.
Riding
A: Pedal Power Riding
Click the red button under the speed control switch to positioning state, press the pedal with foot in clockwise direction, then
the electric bicycle will drive forward normally. Stop pressing with pedal, the electric bicycle stop working, but it will still
drive forward a short distance because of inertance.
B: EV Riding
Click the red button under the speed control switch to reset state, turn the speed control switch with hands in anti-clockwise
direction, then the electric bicycle will drive forward normally, next move off the right hand, resume the speed control switch,
the electric bicycle stop working, but will still drive forward a short distance because of inertance.
Note:
A: For your safety concern, please hold the grip tightly with both hands while riding, at least hold the brake with
two fingers, once there is situation against riding, please pull the brake timely.
B: This bicycle has the function of brake power cut, when riding, either brake, be left or right brake all will cut
off the motor power and ensure safety of riding. Please make sure all functions work well before riding. C: Please do
not turn the electronic speed control switch instantly as to make sure driving safety, and also protect the motor and
battery from damage.
2.
Assembly method and requirements
3.1Installation of front fender
3.1.1Installation of front fender
1.
Take out the front fender, and fix the fender hanger on the front fork with hexangular M6
×
30 bolts;
2.
Put the front fender stick on the front fork, and fasten the nut.(as shown in the below pictures)