Gehl SL3635, Operator'S Manual

Page: 43 / 82

Transporting the Loader
Park the truck or trailer on a level surface. Be sure the
vehicle and its ramps have the weight capacity to support the loader.
Make sure the vehicle surface and its ramps are clear of debris and
slippery material that may reduce traction. Move the loader on and off the
vehicle ramp slowly and carefully. Failure to follow these instructions
could result in an overturn accident.
Observe all local regulations governing the loading and transporting of
equipment. Ensure that the hauling vehicle meets all safety requirements
before loading the skid loader.
1. Place blocks at the front and rear of the hauling vehicle’s tires.
2.
If the loader has an attachment, lift it
slightly off the ground.
3.
Back the loader slowly and carefully
up the ramp onto the vehicle.
4.
Lower the loader attachment to the
vehicle deck, turn off the engine and
remove the key.
5. Fasten the loader to the hauling
vehicle at the points indicated by the
tie-down decals.
6.
Measure the clearance height of the
loader and hauling vehicle. Post the
clearance height in the cab of the
vehicle.
908268/BP0904 40
Fig. 22: Front Tie Downs
Fig. 23: Rear Tie Downs
WARNING