62
50940193/DP0415
On machines equipped with T-bar controls, the left T-bar controls the drive, and the right
T-bar controls the lift/tilt.
Drive Control (Left T-Bar)
Forward, reverse, travel speed and turning
maneuvers are controlled using the left T-
bar (Figure 26):
A. To go forward, push the left T-bar
forward.
B. To go in reverse, pull the left T-bar
rearward.
C. To turn right, twist the control
clockwise.
D. To turn left, twist the control
counter-clockwise.
For gradual turns, twist the T-bar slightly;
for sharp turns, twist the T-bar further.
Turns while moving forward or in reverse can be made by twisting the T-bar while also
pushing it forward or pulling it back.
Moving the T-bar farther from neutral increases the speed steadily to the maximum travel
speed.
Note:
Tractive effort decreases as speed increases. To get maximum tractive effort, move
the T-bar only slightly away from the neutral position.
Note:
The engine will stall if the control is moved too far forward when loading the
bucket.
Be sure the controls are in neutral before starting
the engine. Operate the controls gradually and
smoothly. Excessive speed and quick control movements without
regard for conditions and circumstances are hazardous and could
cause an accident.
Figure 26 – Drive Control (Left T-
Bar)
B
A
D
C
WARNING
Summary of Contents for R135
