131
50940193/DP0415
Important:
Be sure the lifting apparatus is of sufficient capacity for the weight of the
machine. Refer to “Weights” on page 93. If lifting the machine, refer to “Lifting the
Machine Using a Crane or Hoist” on page 115.
3. Stack blocks or place jackstands under the
flat part of the loader chassis. Blocks
should run parallel with, but not touch, the
rear tires.
4. Slowly lower the machine until it rests on
the blocks/jackstands. If the tires still
touch the ground, raise the machine, add
more blocks or raise the jackstands and
lower the machine onto the blocks.
5. Repeat this procedure for the front tires.
When complete, all four tires will be off
the ground so they can be removed.
Lowering the Machine
1. Using a jack or hoist, raise the front of the
machine until it no longer rests on the
front blocks or jackstands.
2. Carefully remove the blocking under the
front of the machine.
3. Slowly lower the machine until the front tires are resting on the ground.
4. Repeat this procedure for the rear tires. When complete, all four tires will be on the
ground with the blocks removed from under the machine.
Figure 90 – Lifting Machine
Summary of Contents for R135
