134
50940193/DP0415
2. Perform “Mandatory Safety Shutdown Procedure” on page 14.
3. Wait until the engine has cooled, but is not completely cold.
Note:
Oil drains faster and more completely when warm.
4.
All machines except model R165:
Remove the rear belly pan to access
engine oil drain plug (X, Figure 94).
5. Position a waste oil collection container
under the engine oil drain plug to catch
draining oil.
Note:
On model R165 machines, engine oil
drain plug (A, Figure 95) is located inside the
left rear wheel well, on the outside of the
chassis behind the left rear wheel.
Important:
Dispose waste engine oil
according to environmental laws, or take to a
recycling center for proper disposal. DO NOT
pour waste engine oil onto the ground or
down a drain.
6. Remove drain plug (X) or (A) and allow
engine oil to drain into the waste oil
collection container.
7. Remove oil filter (W, Figure 96), using a
filter wrench if necessary. Carefully clean
the filter head mounting surface with a
clean cloth.
8. Put clean oil on the new oil filter gasket. Install the filter and tighten 3/4 of a turn past
the point where the gasket contacts the filter head.
9. Reinstall and tighten the drain plug.
Figure 94 – Engine Oil Drain
Plug
X
Figure 95 – Model R165
Remote Engine Oil Drain Plug
Location
A
Figure 96 – Engine Oil Filter
W
Summary of Contents for R135
