Gehl R135, Operator'S Manual

Page: 17 / 206

13 50940193/DP0415
CHAPTER 2
SAFETY
This safety alert symbol means ATTENTION! ALWAYS BE
ALERT! YOUR SAFETY IS INVOLVED! This symbol is used
throughout this operator’s manual and on the decals on the
machine.
The word “DANGER” indicates an imminently
hazardous situation, that, if not avoided, will result
in serious injury or death.
The word “WARNING” indicates a potentially
hazardous situation that, if not avoided, could
result in serious injury or death.
The word “CAUTION” indicates a potentially
hazardous situation that, if not avoided, may result
in minor or moderate injury.
Before operating the machine, read and study the safety information in this manual. Be
sure that everyone who operates or works with the machine is familiar with the safety
precautions. It is essential to have competent and careful operators, who are not physically
or mentally impaired, and are thoroughly trained in the safe operation of the machine and
the handling of loads. It is recommended that the operator be capable of obtaining a valid
motor vehicle operator’s license.
The use of the machine is subject to certain hazards that cannot be eliminated by
mechanical means, but only by exercising intelligence, care and common sense. Such
hazards include, hillside operation, overloading, instability of the load, poor maintenance
and using the machine for a purpose for which it is not intended or designed.
Manitou Americas always takes operator’s safety into consideration during the design
process. Guards and shields are provided, which protect the operator and bystanders from
moving parts and other hazards. Operators must be alert, however, because some areas
cannot be guarded or shielded without preventing or interfering with proper operation.
This Operator’s Manual, and decals on the machine, warn of additional hazards, and these
warnings should be read and observed closely.
Replace a lost or damaged Operator’s Manual. Always store this operator’s manual in the
storage compartment provided for it.
Do not use the machine for any application or purpose other than those described in this
manual, or in manuals supplied with any attachments used with the machine.
Some photographs in this manual may show doors, guards or shields open or removed for
illustrative purposes only. Be sure that all doors, guards and shields are in their proper
operating positions before starting the engine to operate the machine.
DANGER
WARNING
CAUTION