ADV200 SP • Quick start up guide - Specification and installation
11
3 - Transport and storage
Correct transport, storage, erection and mounting, as well as careful operation and maintenance are essential
for proper and safe operation of the equipment.
Protect the inverter against physical shocks and vibration during transport and storage. Also be sure to protect
it against water (rainfall) and excessive temperatures.
Le bon accomplissement des opérations de transport, de stockage, d’installation et de montage, ainsi que l’ex-
ploitation et l’entretien minutieux, sont essentiels pour garantir à l’appareil un fonctionnement adéquat et sûr.
If the Drives have been stored for longer than two years, the operation of the DC link capacitors may be im
-
paired and must be “reformed”. Before commissioning devices that have been stored for long periods, connect
them to a power supply for two hours with no load connected in order to regenerate the capacitors, (the input
voltage has to be applied without enabling the drive).
En cas de stockage des variateurs pendant plus de deux ans, il est conseillé de contrôler l’état des conden-
sateurs CC avant d’en effectuer le branchement. Avant la mise en service des appareils, ayant été stockés
pendant long temps, il faut alimenter variateurs à vide pendant deux heures, pour régénérer les condensateurs
: appliquer une tension d’alimentation sans actionner le variateur.
3.1 General
A high degree of care is taken in packing the ADV200 SP Drives and preparing them for delivery. They should
only be transported with suitable transport equipment (see weight data). Observe the instructions printed on the
packaging. This also applieswhen the device is unpacked and installed in the control cabinet.
Upon delivery, check the following:
- the packaging for any external damage
- whether the delivery note matches your order.
Open the packaging with suitable tools. Check whether:
- any parts were damaged during transport
- the device type corresponds to your order
In the event of any damage or of an incomplete or incorrect delivery please notify the responsible sales offices
immediately. The devices should only be stored in dry rooms within the specified temperature ranges .
Note!
A certain degree of moisture condensation is permissible if this arises from changes in temperature. This does not,
however, apply when the devices are in operation. Always ensure that there is no moisture condensation in devices
that are connected to the power supply!
Caution
Summary of Contents for ADV200 SP Series
Page 105: ......
