page | 14
Using the IR Remote Control Unit
The included IR remote control can also be used to switch between inputs. There are
a total of 16 buttons on the IR remote. The buttons are color-coded in groups of two.
Buttons 1 - 6 selects the desired input. Buttons
A
and
B
select the
Out 1
and
Out 2
,
respectively. The remaining buttons are not used.
In the example, below,
In 5
is routed to
Out 2
. Let’s change the routing state so that
In 6
is routed to
Out 2
:
1. Point the IR remote at the IR sensor on the top panel of the matrix.
2.
The output must always be selected first. Since we want to control the routing state
of
Out 2
, press button
B
on the IR remote control.
3. Press button
6
on the IR remote control to select
In 6
.
4.
The LED indicator for
In 6
will glow bright green, indicating that this input has been
routed to
Out 2
(shown below).
LED indicates a
button was pressed
Routing Basics
IR sensor
Operating the 6x2 Matrix for HDMI 4K x 2K
