Gefen GTV-AUDDEC-N User Manual Download Page 3

Page: 3 / 88

ASKING FOR ASSISTANCE

Rev A3

Technical Support

Telephone

(818) 772-9100

(800) 545-6900

Fax

(818) 772-9120

Technical Support Hours:

8:00 AM to 5:00 PM Monday through Friday, Pacific Time

Write To:

Gefen, LLC

c/o Customer Service

20600 Nordhoff St

Chatsworth, CA 91311

[email protected]

www.gefentv.com

Notice

Gefen, LLC reserves the right to make changes in the hardware, packaging, and

any accompanying documentation without prior written notice.

4x1 HD Switcher w/ Audio Decoding

is a trademark of Gefen, LLC

HDMI

, the

HDMI

logo, and

High-Definition Multimedia Interface

are

trademarks or registered trademarks of HDMI Licensing in the United States and

other countries.

Manufactured under license from Dolby Laboratories.

Dolby, Pro Logic, and the double-D symbol

are registered trademarks of Dolby Laboratories.

All trademarks are the property of their respective owners.

Summary of Contents for GTV-AUDDEC-N

























































































Search results

Summary of Contents for GTV-AUDDEC-N

Reviews:

Related manuals for GTV-AUDDEC-N

Brands by name

Popular brands

Gefen GTV-AUDDEC-N, User Manual

Search results

Summary of Contents for GTV-AUDDEC-N

Reviews:

Related manuals for GTV-AUDDEC-N

Brands by name

Popular brands