Gefen GTB-HDFST-848, User Manual

Page: 56 / 64

RS-232 / TELNET COMMANDS
52
#set_ir Command
The #set_ir set the IR channel for the matrix. The associated DIP switch settings
for the IR remote control unit are returned. See page 21 for details on setting the
IR channel for the IR remote control.
Syntax y :
#set_ir param1
Parameters:
param1 Channel [0 - 3]
Example p :
#set_ir 2
IR channel is set to channel 2
#show_ir Command
The #show_ir displays the current IR channel for the matrix.
Syntax y :
#show_ir
Parameters:
None
Example p :
#show_ir
Current IR channel is: 2