Gefen GTB-HDFST-848, User Manual

Page: 25 / 64

21
IR REMOTE CONTROL
Installing the IR Remote Control Battery
The Remote Control unit ships with two batteries. One battery is required for
operation and the other battery is a spare.
1. Remove the battery cover on the back of the IR Remote Control unit.
2. Insert the included battery into the open battery slot. The positive (+) side of
the battery should be facing up.
3. Replace the battery cover.
Setting the IR Channel
The IR channel on the IR Remote Control must match the IR channel used by the
8x8 Matrix for HDMI. For example, if both DIP switches on the IR Remote Con-
trol unit are set to IR channel 0 (both DIP switches down), then the 8x8 Matrix for
HDMI must also be set to IR channel 0. I See page 51 for information on how to
change the IR channel on the 8x8 Matrix for HDMI .
Remote Channel 2: Remote Channel 3:
Remote Channel 1:
DIP switches y Battery slot
Channel 0 (default):
y
1 2
ON
1 2
ON
1 2
ON
1 2
ON
1 2
WARNING: Risk of explosion if battery is replaced by an incorrect
type . Dispose of used batteries according to the instructions.