Gefen GTB-HDFST-848, User Manual

Page: 26 / 64

22
Routing Sources using the IR Remote Control
Buttons 1 - 8 on the IR remote control correspond to each HDMI input (Input 1 - 8) on
the Matrix. Buttons A - H correspond to each HDMI output (Output A - H). To route a
source to a display, press the desired output fi rst, then press the input.
Routing Example: Route Input 4 to Output C
1. Select Output C by pressing button C on the IR Remote Control. The
number 3 will appear in the upper right-hand corner of the LCD display:
2. Select Input 4 by pressing button 4 on the IR Remote Control. The number
4 will appear in the lower right-hand corner of the LCD display:


p Input 4 selected


p Output C selected
LED indicates a
p button was pressed
IR REMOTE CONTROL