Gefen GTB-HDFST-848, User Manual

Page: 51 / 64

RS-232 / TELNET COMMANDS
47
#fst_fast Command
The #fst_fast command sets the FST (Fast Switching Technology) to fast mode
for the specifi ed inputs. If
param1 is set to 0, then all inputs are set to fast FST
mode.
Syntax y :
#fst_fast param1[...param9]
Parameters:
param1 Input [1 - 8]
Examples p :
#fst_fast 2 3 4
Inputs 2, 3, 4 are set to FST fast mode
#fst_fast 0
All inputs are set to FST fast mode
#show_fst Command
The #show_fst command shows FST status for each specifi ed input. If param1 is
set to 0, then the status for all inputs are displayed.
Syntax y :
#show_fst param1
Parameters:
param1 Input [1 - 8]
Examples p :
#show_fst 2
Inputs 2 is in fast switching mode