EDID Programming Procedure
1. Make sure that the display (or other A/V device) is connected to the Receiver unit and that
all other Receiver / Splitter connections have been made (see pages 10 - 11 ).
2. Select the Receiver that is connected to the display (or other A/V device) that has an EDID
that is most compatible with all devices in the system.
3. Use a paperclip or other small pointed object to depress the EDID button on the front
of the Receiver unit.
4. Release the EDID button when the following message appears on the display:
5. Once the EDID has been successfully updated, the following message will be displayed.
OPERATING THE DAISY CHAIN HD SYSTEM
NOTE:
Before programming the EDID, a Sender and at least one
Receiver must be connected using CAT-5e (or better) cable.
Handle EDID NOW
Summary of Contents for GTB-HD-DCR
Page 1: ... Daisy Chain HD System GTB HD DCS GTB HD DCRP GTB HD DCR User Manual ...
Page 5: ...Sender Unit Layout INTRODUCTION 7 4 3 5 6 1 2 Back Front Top ...
Page 7: ...Splitter Unit Layout INTRODUCTION 7 6 4 3 5 1 2 Top Front Back ...
Page 9: ...Receiver Unit Layout INTRODUCTION 8 4 3 5 7 6 2 1 Front Top Back ...
