Gefen GTB-HD-DCR, User Manual, Page: 11 / 29

CONNECTING THE DAISY CHAIN HD SYSTEM
1. Connect a Hi-Def source to the Sender unit using the included HDMI cable.
The Daisy Chain HD System can be connected in two ways:
► Daisy-Chaining using Splitters
• Connect a CAT-5e (or better) cable or better, up to 330 feet (100 meters), from the
Link Out jack on the Sender unit directly to the Link In jack on a Splitter unit.
• Daisy-chain additional Splitter units, if desired, by connecting a CAT-5e (or better)
cable, up to 330 feet (100 meters), between the Out A and Link In jacks on each
Splitter unit.
• After all Splitter units have been connected, connect a CAT-5e (or better) cable,
up to 330 feet (100 meters), between the Out B jack on each Splitter unit and the
Link In jack on each Receiver unit.
► Connecting Directly to the Receiver unit
• Connect a CAT-5e (or better) cable, up to 330 feet (100 meters), from the Link Out
jack on the Sender unit directly to the Link In jack on the Receiver unit.
Refer to the illustration on the opposite page.
2. Connect an HDTV display (or other HDMI A/V device) to the HDMI Out port on the
Receiver unit(s) using an HDMI cable.
NOTE: If terminating network cables in the field, please adhere to
the TIA/EIA568B specification (see page 26 for details).
Sender
Receiver
to Hi-Def source
Splitter
to HDTV Display
(or other HDMI device)
Splitter
Up to 330 feet
(100 Meters)
Up to 330 feet
(100 Meters)
Receiver
(up to 100 HDMI outputs)
(to additional Splitter or Receiver)