Gefen GTB-HD-DCR, User Manual

Page: 15 / 29

OPERATING THE DAISY CHAIN HD SYSTEM
The default EDID
The Sender unit contains a default EDID which supports the following:
Color Depths Audio Sampling Rates Resolutions / Timings
16 / 20 / 24 bit 32 / 44 / 48 kHz
640 x 480p @ 72 Hz
720 x 480i @ 60 Hz
720 x 480p @ 60 Hz
720 x 576i @ 50 Hz
720 x 576p @ 50 Hz
1280 x 720p @ 50 Hz
1280 x 720p @ 60 Hz
1440 x 480p @ 60 Hz
1440 x 576p @ 50 Hz
1920 x 1080i @ 50 Hz
1920 x 1080i @ 60 Hz
1920 x 1080p @ 50 Hz
1920 x 1080p @ 60 Hz
The default EDID is used when connecting the Daisy Chain HD System “ out-of-the-box”.
Using the External EDID
The
Daisy Chain HD System
has an EDID button on the front panel of the Receiver unit and
Splitter units allowing the EDID of the display (or other device connected to the Receiver /
Splitter unit) to be stored in the Sender unit. Once the Sender unit is programmed with another
EDID, the default EDID cannot be restored.
When programming an EDID, it is critical to consider the capabilities of each display
and/or A/V device in the system. Therefore, the EDID of the display and/or A/V device that
is compatible with all other devices in the system should be used.
See the next page for information on programming an EDID.
EDID Management