Connecting the Extender for HDMI w/ POL
1.
Connect the included HDMI cable between the Hi-Def source and the
HDMI
port on
the Sender unit.
2. Connect an HDTV display to the
HDMI
port on the Receiver unit using another HDMI
cable.
3. Connect a CAT-6 cable from the
Link
jack on the Sender unit to the
Link
jack on the
Receiver unit:
► Ultra HD 4K x 2K up to 170 feet (52 meters) using CAT-6; up to 130 feet
(40 meters) using CAT-5e.
► HDMI and 3DTV up to 230 feet (70 meters) using CAT-6; up to 198 feet
(60 meters) using CAT-5e.
4.
Connect the included 24V DC power supply to the Sender unit and plug the AC power
cord into an available electrical outlet. Power to the Receiver unit is delivered from the
Sender unit over the CAT-5e/CAT-6 cable using Gefen POL technology.
5. For information on using IR control, see
Using Bi-Directional IR
.
Sample Wiring Diagram
page | 6
NOTE:
If terminating network cables in the field, please adhere to
the TIA/EIA568B specification. See
Network Cable Diagram
for
details.
GTB-HDBT-POL
Sender
Receiver
Hi-Def Source
HD Display
HDMI CABLE
CAT-5e CABLE
(Up To 230 FT)
IR Emitter
IR Emitter
IR Input
Automation System
IR
IR
Extender
Getting Started
Installation
