page | 12
Controlling the Display
1. Connect a 3.5mm-to-3.5mm mini-mono cable from one of the electrical IR emitter jacks,
on the automation system, to the
IR In
jack on the
Sender unit
2. Connect an IR emitter from the
IR Out
jack on the Receiver unit to IR sensor on
the display.
Operating the Extender for HDMI w/POL
Using Bi-Directional IR
IR signals
CAT-5e / CAT-6
HDMI cable (to Hi-Def source)
Sender unit
Receiver unit
HD Display
Automation System
3.5mm-to-3.5mm mini-mono cable
HDMI cable
