12
ID
Name
Description
1
Power Indicator
This LED indicator glows solid blue when the
unit is powered. See
LED Status (Page 20)
for more information.
2
Link Indicator
This LED glows solid green when a link
is established between the Sender and
Receiver. See
LED Status (Page 20)
for
more information.
3
HDCP Indicator
This LED indicator glows solid green when the
active HDMI signal contains HDCP encryption.
See
LED Status (Page 20)
for more
information.
4
VGA Indicator
This LED indicator glows solid green when the
VGA input has been selected.
See
LED Status
(Page 20)
for more information.
5
HDMI Indicator
This LED indicator glows solid green when the
HDMI input has been selected. See
LED Status
(Page 20)
for more information.
6
Reset Button
Press and release this button with a thin
blunt object to perform a “soft” reset.
7
VGA Video Input
Connect a VGA cable from your source to
this input.
8
VGA Audio Input
Connect a 3.5mm stereo audio cable from
the analog stereo audio output of your
source to be used with the VGA input.
9
HDMI Input
Connect a Gefen HDMI cable from your
source to this input.
10
Firmware Update Port
To do a firmware update, attach a USB
thumb drive containing the new firmware
to this port, using a USB Micro-B male to
USB Type-A female cable or adaptor. The
Gefen Syner-G™ software, running on a PC
connected to the RS-232 port of the Sender
unit (
Page 28
) will administer the firmware
update process.
Controls, Connectors, and Indicators
Summary of Contents for EXT-UHDA-HBTL-RX
Page 26: ...26 RS 232 RS 232 Commands EXT UHDV WP HBTLS TX ...
Page 27: ...27 RS 232 ...
