15
Controls, Connectors, and Indicators
ID
Name
Description
5
RS-232 Port
This port can be used for extending
2-way RS-232 communications between
the Sender and the Receiver, for remote
control of the Sender, for Gefen Syner-G™
interface using an Rs-232 connection with
a computer. Connect Tx, Rx, and Ground
from an automation control device or an
RS-232 device-to-be-controlled, using the
removable 3-pin “Captive Screw” Phoenix
connector.
Please note that The Sender and
Receiver’s Tx, Rx, and Ground pin-outs for
their Phoenix connectors are different. To
ensure proper operation, please follow the
pin-out of each connector as printed on each
unit’s enclosure.
6
IR In/Ext
THIS FEATURE IS NOT ACTIVE WHEN
CONNECTED TO EXT-UHDV-WP-HBTLS-
TX: 3.5mm mini-stereo jack. Connect an IR
Extender (Gefen part no. EXT-RMT-EXTIRN)
to this port. Alternatively, connect a 3.5mm
mini-stereo connector from this port to the
output of an automation system with an
electrical IR output.
7
IR Out
THIS FEATURE IS NOT ACTIVE WHEN
CONNECTED TO EXT-UHDV-WP-HBTLS-
TX: Connect an EXT-IREMIT IR Emitter (1 pc
included) from this port to the IR sensor of the
device to be controlled.
8
HDMI Out
Use a Gefen HDMI cable to connect an
HDMI display to this port.
9
Line Out
This port provides analog Left and Right
channels of audio de-embedded from
the HDMI signal, for use with outboard
amplification. Connect a 3.5mm stereo
audio cable from this port to the analog
stereo input of your amplifier or processor.
Summary of Contents for EXT-UHDA-HBTL-RX
Page 26: ...26 RS 232 RS 232 Commands EXT UHDV WP HBTLS TX ...
Page 27: ...27 RS 232 ...
