Gefen EXT-UHDA-HBT2, User Manual, Page: 26 / 68

page | 16
Controlling the Source from the Viewing Location
1. Connect an IR extender (Gefen part no. EXT-RMT-EXTIRN) to the IR In/Ext port
on the Receiver unit. If using an automation system, connect the 3.5mm mini-mono
connector from the IR In/Ext port on the Receiver unit to the automation system.
IR signals are transmitted over the CAT-5 cable.
2. Connect the IR emitter from the IR Out port, on the Sender unit, to the IR sensor
window on the source device.
w/ Ethernet, RS-232, 2-way IR, 2-way Audio, and Bi-Directional POH
HDBaseT Extender R
4K Ultra HD
®
™
48V DC POH
RS-232
IR In/Ext IR Out Audio In
Optical Left Right
Audio Out Link HDMI Out Ethernet
EXT-UHDA-HBT2-R
USB
Link
Video
Power
w/ Ethernet, RS-232, 2-way IR, 2-way Audio, and Bi-Directional POH
HDBaseT Extender S
4K Ultra HD
®
™
48V DC POH
RS-232
IR In/Ext IR Out Audio Out
Optical
Left Right
Audio In Link HDMI In Ethernet
EXT-UHDA-HBT2-S
USB
Link
Video
Power
B
asic Oper
ation
B
asic Oper
ation
Two-way IR Control
IR signals
IR extender
or
from Automation
System
4K Ultra HD source
IR emitter
Sender unit
CAT-5 cable
Receiver unit
B
asic Oper
ation
B
asic Oper
ation
Electrical IR cable