Gefen EXT-UHDA-HBT2, User Manual, Page: 16 / 68

page | 6
Ge
tting S
tar
ted
Ge
tting S
tar
ted
Connection Instructions
► Video
1. Connect the included HDMI cable from the 4K Ultra HD source device to the
HDMI In port on the Sender unit.
2. Connect an HDMI cable from the HDMI Out port on the Receiver unit
to a 4K Ultra HD display.
► Audio
3. Connect a stereo RCA cable from an analog audio source to the Audio In ports
on the Sender unit.
4. Connect a stereo RCA cable from the Audio Out ports on the Receiver unit to
an A/V receiver.
5. Connect an optical audio cable from the 4K Ultra HD display to the Optical Audio In
TOSLINK port on the Receiver unit.
6. Connect an optical audio cable from the Optical Audio Out TOSLINK port on the
Sender unit to an A/V receiver.
► Link
7. Connect a shielded CAT-5 (or better) cable from the Link port on the Sender unit
to the Link port on the Receiver unit.
Maximum Resolution Mode Distance
1920 x 1080p 60 Hz @ 8-bit Long Reach mode 495 feet (150 meters)
3840 x 2160p 60 Hz @ 4:2:0 Normal mode 330 feet (100 meters)
See DIP Switch Configuration (page 10) for more information on setting
the extension distance.
► Ethernet
8. Connect a CAT-5 (or better) cable from the LAN to the Ethernet port on the Sender
unit.
9. Connect a CAT-5 (or better) cable from the Ethernet port on the Receiver unit to
a network device.
Installation