Gefen EXT-UHD600-41 User Manual Download Page 24

Page: 24 / 136

page | 14

asic Oper

ation

asic Oper

ation

Introduction to the Web Interface

The 4x1 Switcher for HDMI w/HDR includes a built-in web interface. We recommend that

the web interface be used to control the switcher as it provides easy management of all

features used by the switcher.

►

Logging In

1. Launch your favorite web browser.

2. In the address bar, type the IP address of the switcher.

3. The login page will be displayed.

Select the user from the

Username

drop-down list.

•

Operator

The Operator username provides restricted access to the web interface.

This username allows access to both the Routing and Status tabs.

The default password for the Operator user name is

Operator

All passwords are case-sensitive. For information on changing

the default password, see

Configuring Network Settings (page 33)

The Web Interface

asic Oper

ation

asic Oper

ation

Summary of Contents for EXT-UHD600-41









































































































































Search results

Summary of Contents for EXT-UHD600-41

Reviews:

Related manuals for EXT-UHD600-41

Brands by name

Popular brands

Gefen EXT-UHD600-41, User Manual

Search results

Summary of Contents for EXT-UHD600-41

Reviews:

Related manuals for EXT-UHD600-41

Brands by name

Popular brands