Gefen EXT-HD-EDIDPN, User Manual

Page: 19 / 52

page | 9
The table below provides a status summary of the Power LED.
LED Status Conditions
Power Solid green • Detective is powered
• HPD is high
• EDID has been successfully written
(to a EDID bank or the local input)
Solid red • Bad EDID
• HPD is low
Flashing
green
• EDID is being read from sink
• EDID is being read from EDID bank
Passing HDCP Content
In order for the HDMI Detective Plus to pass HDCP content (e.g. Blu-ray, etc.), set DIP
switch 4 to the ON (down) position.
After setting DIP switch 4 to the ON position, reboot the HDMI Detective Plus by
disconnecting and then reconnecting the power.
Page Title
Operating the HDMI Detective Plus
DIP switch 4 in
ON position
EDID Programming
IMPORTANT: When enabling or disabling HDCP pass-through,
the HDMI Detective Plus must be power-cycled in order for the DIP
switch setting to take effect.