Gefen EXT-HD-EDIDPN, User Manual

Page: 13 / 52

ID Name Description
1 DIP Switches Use this DIP switch bank to select a
pre-programmed EDID. See EDID
Programming for more information.
2 HDMI Out Connect the Hi-Def display to this port using
an HDMI cable.
3 WR Write-enable switch. Flip this switch to the
“E” position to allow the HDMI Detective
Plus to be programmed with an EDID. Set
this switch to the “D” position to disable
programming and prevent an accidental
erasure of the current EDID.
4 Prog Press this button to begin programming an
EDID. See EDID Programming for more
information.
5 HDMI In Connect the Hi-Def source to this port using
the included HDMI cable.
6 USB Connect the included USB Type A to Mini-
USB Type B cable to this connector. This
interface provides serial control for the
detective.
7 Power This LED will glow bright green when the unit
is powered.
8 5V DC Connect the included 5V DC power supply to
this power receptacle.
Getting Started
page | 3
Panel Layout