Gefen EXT-HD-EDIDPN, User Manual

Page: 32 / 52

page | 22
Advanced Operation
Commands
#ddcmode
The
#ddcmode
command sets the DDC mode. Use this command to enable / disable
HDCP with the local EDID or use EDID pass-through with HDCP enabled. If param1 is
not supplied, then the current DDC mode is returned.
Syntax
:
#ddcmode param1
Parameters :
param1
Value [0 ... 2]
Value Description
1
Local EDID with HDCP enable
2
Local EDID with HDCP disable
3
EDID pass-through with HDCP
enable
Examples :
#ddcmode 2
DDC mode set to Local EDID HDCP disable
#ddcmode
DDC mode is Local HDCP Enable