Gefen EXT-GAVA, User Manual

Page: 59 / 148

53
USING THE GAVA WIZARD
3. Click the Next button in the lower-right corner of the screen to continue to the
Function Keys tab.
Function Keys
The Functions Keys are used to send commands to the device that are not included in the
default control screen, such as a Netflix® button, etc
Macros may also be used to assign a command from a different device to the control
screen. In this example, we will assign two commands: “pc” and “aspect”. The “pc”
command will allow use to switch to the VGA input on the display. The “aspect” command
will allow us to cycle through the available aspect ratios provided by the display.
1. Select Command from the drop-down list for Function Key 1 :
Command / Macro selection box
Select either Command or Macro from the drop-down list.
Macros must be created before they can be selected..
NOTE: Ports that have already been assigned will be highlighted in
red. For IR devices, you may use a single IR port to connect two (or
more) devices using a dual IR emitter (Gefen part no. EXT-2IREMIT)
or IR Distribution Block (Xantech® or SpeakerCraft®). RS-232 ports
can only be connected to a single device.
NOTE:
Macros should be created after configuring all devices. After
creating macros, you can return to this section to add the macros to
the function keys.