Gefen EXT-GAVA, User Manual

Page: 33 / 148

27
USING THE GAVA WIZARD
Lutron RadioRA® 2 and HomeWorks® QS systems should first be set up, configured,
programmed, and downloaded to the Lutron controller via the Lutron software before
adding them to the GAVA system. See the Lutron documentation for details.
After completing the design, programming, activation, and transfer procedure, connect to
the Main Repeater via IP.
Extracting the XML from the Lutron software
1. Using Internet Explorer Web browser, go to http://<MainRepeaterIPAddress>/
DbXmlInfo.xml (where <MainRepeaterIPAddress> is the IP address assigned to
the Lutron Main Repeater.
• When using a static IP address, the IP address is assigned in the RadioRA 2
software.
• When using a dynamically-assigned IP address (DHCP), the IP address can be
obtained from your router’s DHCP table or by using the Fing utility (see page 7).
Refer to the router documentation for details.
• Example: http://192.168.2.105/DbXmlInfo.xml
2. Click on the File menu at the top of the page in the Web browser.
3. Select Save As...
4. Save the XML file to the desired location on your computer.
< ?xml version= ”1.0” ? >
< !--Copyright 2010 Lutron Electronics Co., Inc. All rights reserved. -- >
< !-- -- >
< !-- This file and the information contained herein are confidential -- >
< !-- and proprietary to Lutron Electronics Co., Inc. Unauthorized -- >
< !-- possession or use of this file or the information contained herein -- >
< !-- is prohibited. No reproduction may be made of this file without -- >
< !-- the express written permission of Lutron Electronics Co., Inc. -- >
< Project >
< ProjectName / >
< Copyright>Copyright 2010 Lutron Electronics Co., Inc. All rights
reserved
< /Copyright >
< GUID>66fae3053d80464e879861c4d434ea12
< /GUID >
< AppVer > 05.00.10
< /AppVer >
< XMLVer > 1.0
< /XMLVer >
...
...
Adding Control Gateways
d
Adding a Lutron Lighting Control System
Sample XML File