Gefen EXT-GAVA User Manual Download Page 26

Page: 26 / 148

USING THE GAVA WIZARD

The

Software Update

screen displays the version information for the Device Library and

system firmware that is currently installed on the GAVA. This screen also allows you to

check for newer version of firmware. If a newer version of firmware is discovered, then it

will be displayed under the “available” column.

Check for Updates

Click this button to check

for firmware updates

Versions marked in

red, indicate that a new

version is available for

download.

Update

Click these buttons to install the updates once

they have been downloaded. The top Update

button updates the Device Library. The bottom

Update button updates the system (HTML and

Controller) firmware.

NOTE:

Internet access is required to check for and install updates.

Basic Configuration

Software Updates

Summary of Contents for EXT-GAVA





















































































































































Search results

Summary of Contents for EXT-GAVA

Reviews:

Brands by name

Popular brands

Gefen EXT-GAVA, User Manual

Search results

Summary of Contents for EXT-GAVA

Reviews:

Brands by name

Popular brands