Gefen EXT-DVIK-MV-41 User Manual Download Page 63

Page: 63 / 136

page | 53

4. Select the desired option by using the ◄ or ► keys.

If the

Show PC Name

is set to

Yes

, then the name of the PC will be displayed above

the current input resolution. This is the default setting.

If the

Show PC Name

is set to

, then only the input resolution will be displayed.

See

Show Video Signal (page 54)

for more information on hiding / displaying

the current input resolution.

5. Once the desired option has been selected, press the

Esc

key.

6. The following message will be displayed:

7. Press the

Enter

key to select the

Yes

option and save the changes.

To discard changes, press the ► key to select the

option, then press

Enter

8. To return to the previous screen, without making changes, press the

Esc

key.

asic Oper

ation

OSD Menu

Yes

Save Before Exit?

Esc

Back

PC03

1920 x 1200

PC Name

Summary of Contents for EXT-DVIK-MV-41









































































































































Search results

Summary of Contents for EXT-DVIK-MV-41

Reviews:

Related manuals for EXT-DVIK-MV-41

Brands by name

Popular brands

Gefen EXT-DVIK-MV-41, User Manual

Search results

Summary of Contents for EXT-DVIK-MV-41

Reviews:

Related manuals for EXT-DVIK-MV-41

Brands by name

Popular brands