Gefen TOOLBOX GTB-HD4K2K-442-BLK User Manual Download Page 4

Page: 4 / 114

4K Ultra HD 4x2 Matrix for HDMI

Gefen, LLC

c/o Customer Service

20600 Nordhoff St.

Chatsworth, CA 91311

Telephone:

(818) 772-9100

(800) 545-6900

Fax:

(818) 772-9120

Email:

[email protected]

Visit us on the Web:

www.gefentoolbox.com

Technical Support Hours:

8:00 AM to 5:00 PM Monday - Friday, Pacific Time

4K Ultra HD 4x2 Matrix for HDMI

is a trademark of Gefen, LLC.

Important Notice

Gefen, LLC reserves the right to make changes in the hardware, packaging, and any

accompanying documentation without prior written notice.

HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or

registered trademarks of HDMI Licensing in the United States and other countries.

All trademarks are the property of their respective owners.

Contacting Gefen Technical Support

Summary of Contents for GTB-HD4K2K-442-BLK



















































































































Search results

Summary of Contents for GTB-HD4K2K-442-BLK

Reviews:

Brands by name

Popular brands

Gefen TOOLBOX GTB-HD4K2K-442-BLK, User Manual

Search results

Summary of Contents for GTB-HD4K2K-442-BLK

Reviews:

Brands by name

Popular brands