Gefen TOOLBOX GTB-HD4K2K-442-BLK, User Manual

Page: 13 / 114

page | 3
Getting Started
Panel Layout
ID Name Description
1 FST (Fast / Slow) Use this recessed button to switch between
Fast and Slow FST (Fast Switching
Technology) modes. See Fast Mode vs
Slow Mode for more information on using
FST mode. The LED indicators will display
the current mode.
2 Audio (2ch / Multi-ch) Use this recessed button to switch between
2CH and Multichannel audio on the output.
The LED indicators will display the current
mode. See Selecting the Audio Mode for
more information on using this feature.
3 EDID (Int / Ext) Use this recessed button to switch between
internal (Int) and external (Ext) EDID
modes. The LED indicators will display
the current mode. See Selecting the EDID
Mode for more information.
4 Out 1 / Out 2 (selection) Consecutively press the Out 1 button
to route the desired input to Out 1.
Consecutively press the Out 2 button to
select the desired input for Out 2.
See Routing Inputs to Outputs for more
information. The LED indicators will
display the current routing state.
5 In (1 - 4) Connect an HDMI cable from an Ultra
Hi-Def source to any of these HDMI ports.
6 Out 1 / Out 2 (outputs) Connect an Ultra HD display to each of
these ports using an HDMI cables.
7 Power This LED indicator will glow bright blue
when the included 5V DC power supply
is connected between the matrix and an
available electrical outlet.
8 RS-232 Connect an RS-232 cable from this port to
an RS-232 device. See RS-232 and IP
Configuration for more information.
9 IR Ext Connect an IR Extender (Gefen part no.
EXT-RMT-EXTIRN) to this port.
(continued on next page)