Gefen TOOLBOX GTB-HD4K2K-442-BLK, User Manual

Page: 24 / 114

page | 14
Using the IR Remote Control
The included IR remote control unit can also be used to switch between each input.
There are two columns of four buttons each on the IR remote.
1. Point the included IR remote control unit at the IR sensor on the top panel. If an IR
extender is being used, then both IR sensors will be used to receive IR signals.
Buttons 1 - 4 control the routing for Out 1 ( In 1 - In 4 ) and buttons 5 - 8 control
the routing for
Out 2
(
In 1
-
In 4
).
2. Press the desired button on the IR remote control to select the output and input
to be routed.
Operating the 4K Ultra HD 4x2 Matrix for HDMI
Routing Basics
IR extender
IR sensor
LED indicates a
button was pressed