Geemarc MyDECT 100 Page 60 User Manual Download

Page: 60 / 72

Register a new Handset

Before registering a handset to the base, you should press and

hold the

key on the bottom of the base for about 5 seconds

and then release it.

Press

(left side)

to activate the menu

Use

and

to scroll through the menu to select

‘REGISTER’

Press

(left side)

to select

Use

and

to scroll through the base names list

Press

(left side)

to select desired base. The

handset will search for the requested base and the

relevant information will flash on the LCD.

If the base is found and the handset is successfully

registered, you will be prompted to enter the PIN code

(the default is 0000).

If the PIN code is accepted, the registration tone will

sound and the base assigns a number to the handset. If

the PIN code entered is invalid, a warning tone will sound,

and the handset will return to the

previous registration state.

ADDITIONAL HANDSETS & BASES

Summary of Contents for MyDECT 100









































































Search results

Summary of Contents for MyDECT 100

Reviews:

Related manuals for MyDECT 100

Brands by name

Popular brands

Geemarc MyDECT 100, User Manual

Search results

Summary of Contents for MyDECT 100

Reviews:

Related manuals for MyDECT 100

Brands by name

Popular brands