background image

39 

Adding Recent Numbers to the Phone Book 

 

 

Pick up handset.   

Press 

  in standby mode 

 

 

 

Use 

 and 

  to scroll through thedialled numbers 

until you find the number you wish to add to phone book 

 

 

 

Press 

 

(left side)

 to confirm 

 

 

 

Press 

 

(left side)

 again to select 

‘ADD TO PB’

 

 

 

 

The display will show

 

‘NAME?

Enter the name you wish 

using the numeric keypad (see character map below)

 

 

 

 Press 

 

(left side)

 to confirm 

 

 

 

The display will show the selected number from the 

recently dialled list 

 

 

 Press 

 

(left side)

 to confirm 

 

 

 

Use 

 and 

  to scroll through the melody menu to 

select desired ringer tone.    As you scroll through, the 

telephone demonstrates the selected melody.    If you 

want to set a VIP number, you should select a special 

ring tone. The ring tone should be different from the 

external ring you have set. You can set up to 9 VIP ring 

tones associated with 9 numbers 

 

 

 

Press 

 

(left side)

 to confirm.  Press 

 

to return to 

standby or wait 30 seconds 

USING THE TELEPHONE 

Summary of Contents for MyDECT 100









































































Reviews: