manualshive.com logo in svg

Geemarc MyDECT 100, User Manual

Share
Download
Geemarc MyDECT 100 User Manual Download Page 16

14 

Location 

Ensure you situate the telephone close enough to the power 
socket so that the cable will reach safely without stretching. Also, 
the mains power needs to be easily accessible in case you need 
to disconnect the power. 
 
Make sure the telephone is at least 1 metre away from other 
electrical products e.g.TV, radio and monitors so as to avoid 
interference.    Also, avoid direct heat and sunlight. 
 
We advise you to place the telephone on a table cloth or similar, 
as the rubber feet on the base can mark some surfaces 

Handset Range 

The telephone has a range of 30-50 metres indoors and up to 300 
metres outdoors.    The range will be reduced when there is no 
clear line of sight between the base and handset.    Place the base 
as high as practically possible to ensure the best signal between 
the base and the handset.    The 

  icon at the top left of the LCD 

display will blink and the signal strength bars will disappear to 
warn you if you have moved out of range of the base.    You will 
need to move closer to the base station as the telephone line 
might be disconnected and the handset will return to standby. 

     

                     

 

       

 

 

This icon will 

blink when 

handset is out 

of range

INSTALLATION 

Summary of Contents for MyDECT 100









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands