Geely JL481Q, Manual, Page: 133 / 198

Fig. 287 remove the high voltage wire from the two rubber bushes
Fig. 288 Measure the resistance of the high voltage wire Fig.289 Fix the high voltage wire by using a clip
Fig. 286 examine the spark plug’s arcing
2. Examination of high voltage wires
(1) Remove the high-voltage wire from the spark plug and
distributor cover, i.e. from the rubber bushes on them.
Note: do not pull the wire so as not to damage the core body
inside the high voltage wire (See Fig. 287).
(2) Use a multimeter to measure the resistance of the high
voltage wire (See Fig. 288). The maximum resistance should
be 25,000ohm. If the measured resistance exceeds this
maximum value, you shall examine the terminals of the high
voltage wire. If necessary, you shall replace it.
(3) Reconnect the high voltage wire to the spark plug ,and fix
the high voltage wire by using a clip (See Fig. 289).
129