45
Q9. If you are asked to switch the network during the wifi config, please choose NO to stay
with the GT-printer wi-Fi network, as shown in the following picture.
8. Specs
CPU:STMESP8266
power supply:5V DC
Working current: 150mA(on average),500mA(peak)
USB 2.0 full-speed host
TF card support: SDSC,SDHC(<32G);CLASS2,CLASS4
WIFI
Frequency: 2.4G~2.5G (2400M~2483.5M)
Transmission power: 802.11b: + 20 dBm
802.11g: +17 dBm
802.11n: +14 dBm
Receiving sensitivity: 802.11b: -91 dBm (11 Mbps)
802.11g: -75 dBm (54 Mbps)
802.11n: -72 dBm (MCS7)
Summary of Contents for 3D WiFi
